1. Karami, R. (1992) Study of Rigidity Khorjini
Connections. Sharif University of Technology,
Department of Civil Engineering.
2. Asghari, S. (1999) Exper imental Study of
Khorjini Connections. Amirkabir University of
Technology, Department of Civil and Environmental
Engineering.
3. Sadeghian, P. (1999) Analytical Study of Khorjini
Connections. Sharif University of Technology,
Department of Civil Engineering.
4. Mirghaderi, S. and Dehghani Renani, M. (2008)
The rigid seismic connection of continuous beams
to column. Journal of Constructional Steel
Research, 64, 1516-1529.
5. Dehghani Renani, M. and Mirghaderi, R. (2006)
The new details of rigid connection. Proceedings
of First European Conference on Earthquake
Engineering, Geneva.
6. Dehghani, M. (2001) Analytical and Experimental
Studies of Khorjini Beam to Column
Connections and New Detail of Rigid
Connection. School of Civil Engineering,
University of Tehran.
7. Chancellor, N.B., Eatherton, M.R., Roke D.A.,
and Akbas, T. (2014) Self- Centering seismic
lateral force resisting systems: high performance
structures for the city of tomorrow. Buildings,
520-548.
8. Christopoulos, C. Tremblay, R., Kim, H., and
Lacerte, M. (2008) Self-centering energy dissipative
bracing system for the seismic resistance
of structures: Development and validation.
Journal of Structural Engineering, 134(1),
96-107.
9. Shahini, M., Sabbagh, A.B., Davisdon P., and
Mirghaderi, R. (2019) Development of coldformed
steel moment- resisting connections with
bolting friction- slip mechanism for seismic
applications. Thin- Walled Structures, 141, 217-
231.
10. Roke, D.A. Sause, R., Ricles, J.M., and
Chancellor, N.B. (2010) Damage-Free Seismic-
Resistant Self-Center ing Concentr ically-
Braced Frames. ATLSS Report No. 10-09,
Bethlehem.
11. Ricles, J. Sause, R. Garlock, M., and Zhao, C.
(2001) "Posttensioned seismic-resistant connections
for steel frames. Journal of Structural
Engineering, 127(2), 113-121.
12. Wolski, M.E. (2006) Experimental Evaluation
of a Bottom Flange Friction Device for a Self
Centering Seismic Moment Resistant Frame
with Post-Tensioned Steel Moment Connections,
M.S. Thesis, Dept. of Civil and
Environmental Eng., Lehigh University,
Bethlehem, PA.
13. Nabid, N., Hajirasouliha, I., and Petkovski, M.
(2019) Adaptive low computational cost
optimisation method for Performance- based
seismic design of friction dampers. Engineering
Structures, 198.
14. Grondin, G., Jin, M., and Josi, G. (2008) Slip
critical bolted connections- a reliability analysis
for design at ultimate limit state. University of
Alberta.
15. Nester, E. (1966) Influence of variation of the
contact area upon the slip resistance of a bolted
joint. Lehigh University.
16. Kuperus, A. (1996) The Ratio between the Slip
Factor of Fe 52 and Fe 37. Delf University of
Technology.
17. Allan, R. and Fisher, J. (1968) Bolted joints with oversized and slotted holes. Journal of the
Structural Division, 94, 2061-2080.
18. Garigorian, C.E. and Popov, E.P. (1994) Energy
Dissipation with Slotted Bolted Connections.
College of Engineering University of California
at Berkeley.
19. S. Inc (2012) ABAQUS Analysis User's Manual
Version 6.12-1.
20. Seismic Provisions for Structural Steel Buildings,
Illinois (2016) American Institute of Steel
Construction (AISC).
21. Wolski, M., Ricles, J.M., and Sause, A.R. (2009)
Experimental study of a self-centering beamcolumn
connection with bottom flange friction
device. Journal of Structural Engineering,
135(5), 479-488.
22. Akshay Gupta, H.K. (1999) Seismic Demands
for Performance Evaluation of Steel Moment
Resisting Frame Structures. Department of civil
and Environmental Engineering Stanford
University, Stanford.