Abdel-Rasoul, E. I., & Mohamed, M. T. (2006). Measurement and evaluation of blasting ground vibrations and airblasts at the limestone quarries of Assiut Cement Company (CEMEX). Journal of Engineering Sciences, 34(4), 1293–1309.
Abedini, F., Rafiee-Dehkharghani, R., & Laknejadi, K. (2022). Mitigation of vibrations caused by dynamic compaction considering soil nonlinearity. International Journal of Civil Engineering, 20(7), 809-826.
Adam, M., & von Estorff, O. (2005). Reduction of train-induced building vibrations by using open and filled trenches. Computers & Structures, 83(1), 11–24.
Al-Hussaini, T. M., & Ahmad, S. (1996). Active isolation of machine foundation by in-filled trench barriers. Journal of Geotechnical Engineering, 122 (4), 288–294.
Attewell, P. B., & Farmer, I. W. (1973). Modern piling: part two-attenuation of ground vibrations from pile driving. Ground Engineering.
Celebi, E., Fırat, S., Beyhan, G., Cankaya, I., Vural, I., & Kırtel, O. (2009). Field experiments on wave propagation and vibration isolation by using wave barriers. Soil Dynamics and Earthquake Engineering, 29, 824–833.
Chew, J. H., & Leong, E. C. (2019). Field and numerical modelling of sand-rubber mixtures vibration barrier. Soil Dynamics and Earthquake Engineering, 125, 105740.
Ekanayake, S. D., Liyanapathirana, D. S., & Leo, C. J. (2014). Attenuation of ground vibrations using in-filled wave barriers. Soil Dynamics and Earthquake Engineering, 67, 290-300.
El Naggar, M. H., & Chehab, A. G. (2005). Vibration Barriers for Shock-producing Equipment. Canadian Geotechnical Journal, 42(1), 297–306.
Eslami Haghighat, A. (2015). Diffraction of Rayleigh wave by simple surface irregularity using boundary element method. Journal of Geophysics and Engineering, 12, 365-375.
Farshi Homayoun Rooz, A., & Hamidi, A. (2017). Numerical analysis of factors affecting ground vibrations due to continuous impact pile driving. International Journal of Geomechanics (ASCE), 17(12), Article 04017107.
Farshi Homayoun Rooz, A., Pourjenabi, M., & Hamidi, A. (2018). Allowable distance from impact pile driving to prevent structural damage considering limits in different standards. Practice Periodical on Structural Design and Construction, 23(1), 04017029.
Farshi Homayoun Rooz, A., & Hamidi, A. (2019). A Numerical Model for Continuous Impact Pile Driving Using ALE Adaptive Mesh Method. Soil Dynamics and Earthquake Engineering, 118, 134-143.
Fathi Afshar, N.; Hamidi, A.; Tavakoli Mehrjardi, G. (2024). Impact of diffraction on screening of dynamic compaction waves with barriers. Innovative Infrastructure Solutions, 9, Article 184.
Ghanbari, E., & Hamidi, A. (2014). Numerical modeling of rapid impact compaction in loose sands. Geomechanics and Engineering, 6(5), 487-502.
Ghanbari, E., & Hamidi, A. (2015). Improvement parameters in dynamic compaction adjacent to the slopes. Journal of Rock Mechanics and Geotechnical Engineering, 7(2), 233-236.
Hamidi, A., Farshi Homayoun Rooz, A., & Pourjenabi, M. (2018). Allowable distance from impact pile driving to prevent structural damage considering limits in different standards. Practice Periodical on Structural Design and Construction (ASCE), 23(1), Article 04017029.
Hamidi, A., Farshi Homayoun Rooz, A., & Pourjenabi, M. (2019). Closure to Allowable distance from impact pile driving to prevent structural damage considering limits in different standards. Practice Periodical on Structural Design and Construction (ASCE), 24(1), Article 07018002.
Hamidi, A., & Farshi Homayoun Rooz, A. (2021). Efficiency analysis of open trench for impact pile driving through a single-variable method. Marine Georesources & Geotechnology, 39(1), 82-102.
Liu, J., Feng, G., Zhang, J., Zhao, X., Yu, C., & Zhao, M. (2018). Vibration Isolation Mechanism of Concrete Piles for Rayleigh Waves on Sand Foundations. Shock and Vibration, 1-13.
Hung, H. H., Yang, Y. B., & Chang, D. W. (2004). Wave barriers for reduction of train-induced vibrations in soils. Journal of Geotechnical and Geoenvironmental Engineering, 130(12), 1283–1291.
Hwang, J. H., & Tu, T. Y. (2006). Ground vibration due to dynamic compaction. Soil Dynamics and Earthquake Engineering, 26(5), 337-346.
Kennedy, B. A. (1990). Surface mining (2nd ed.). Society for Mining, Metallurgy, and Exploration.
Kermani, A., Hamidi, A., & Asemi, F. (2024). Mitigation of Transient Vibrations Induced by Dynamic Compaction: A Numerical Study on the Efficacy of Open Trench and Borehole Barriers. Ninth International Conference on Seismology and Earthquake Engineering, Tehran, Iran (Islamic Republic of). https://seeconferences.ir/
Klein, R., Antes, H., & Le Houédéc, D. (1997). Efficient 3D modelling of vibration isolation by open trenches. Computers and Structures, 64(1−4), 809–817.
Liu, J., Yu, C., Li, K., & Wen, M. (2020). Test on the Influence of Geometric Parameters of an Annular Trench on the Vibration Isolation Area. Shock and Vibration, 1-19.
Majumder, M., & Venkatraman, S. (2023). A state-of-the-art review paper on the vibration screening techniques using open and in-filled trenches. Asian Journal of Civil Engineering, 1-16.
Massarsch, K. R., & Broms, B. B. (1991). Damage criteria for small amplitude ground vibrations. In Proceedings of 2nd International Conference on Recent Advances in Geotechnical and Earthquake Engineering and Soil Dynamics, Missouri Univ. of Science and Technology, St. Louis, 2, 1451–1459.
Mehdipour, S., & Hamidi, A. (2017). Impact of tamper shape on the efficiency and vibrations induced during dynamic compaction of dry sands by 3D finite element modelling. Civil Engineering Infrastructures Journal, 50(1), 151-163.
Naghizadehrokni, M., Zeigler, M., & Sprenger, J. (2020). A full experimental and numerical modelling of the practicability of thin foam barrier as vibration reduction measure. Soil Dynamics and Earthquake Engineering, 139, 106416.
Nash, J. E., & Sutcliffe, J. V. (1970). River flow forecasting through conceptual models part I—A discussion of principles. Journal of Hydrology, 10(3), 282-290.
New, B. M. (1986). Ground vibrations caused by civil engineering works. Research Rep. No. 53, Transport and Research Road Laboratory, Crowthorne, U.K.
Pourjenabi, M., & Hamidi, A. (2015). Numerical modeling of dynamic compaction process in dry sands considering critical distance from adjacent structures. Structural Engineering and Mechanics, 56(1), 49-56.
Qiu, B., Limam, A., & Djeran-Maigre, I. (2014). Numerical study of wave barrier and its optimization design. Finite Elements in Analysis and Design, 84, 1-13.
Rezaei, M., Hamidi, A., & Farshi Homayoun Rooz, A. (2016). Investigation of peak particle velocity variations during impact pile driving process. Civil Engineering Infrastructures Journal, 49(1), 59-69.
Richart, F. E., Hall, J. R., & Woods, R. D. (1970). Vibration of soils and foundations. International Series in Theoretical and Applied Mechanics. Prentice-Hall.
Saikia, A., & Das, U. K. (2014). Analysis and design of open trench barriers in screening steady-state surface vibrations. Earthquake Engineering and Engineering Vibration, 13, 545-554.
Swedish Institute for Standards (SIS). (1999). Vibration and Shock – Guidance Levels and Measuring of Vibrations in Buildings Originating from Piling, Sheet Piling, Excavating and Packing to Estimate Permitted Vibration Levels (in Swedish), SS 02 52 11. Stockholm, Sweden.
Swiss Association for Standardization (SNV). (1992). Effects of Vibration on Construction, SN640312. Winterthur, Switzerland.
Todini, E., & Biondi, D. (2016). Calibration, parameter estimation, uncertainty, data assimilation, sensitivity analysis, and validation. In Handbook of Applied Hydrology (2nd ed.). McGraw Hill Education.
Tsai, P. H., & Chang, T. S. (2009). Effects of open trench siding on vibration-screening effectiveness using the two-dimensional boundary element method. Soil Dynamics and Earthquake Engineering, 29, 865-873.
Ulgen, D., & Toygar, O. (2015). Screening effectiveness of open and in-filled wave barriers: A full-scale experimental study. Construction and Building Materials, 86, 12-20.
Wang, W., Chen, J. J., & Wang, J. H. (2017). Estimation method for ground deformation of granular soils caused by dynamic compaction. Soil Dynamics and Earthquake Engineering, 92, 266-278.
Whenham, V., Areias, L., Rocher-Lacoste, F., Vié, D., Bourdouxhe, M. P., & Holeyman, A. (2009). Full scale sheet pile vibro-driving tests. In Proceedings of the 17th International Conference on Soil Mechanics and Geotechnical Engineering, 2009 (Volumes 1, 2, 3 and 4) (pp. 1354-1357). IOS Press.
Woods, R. D. (1968). Screening of surface waves in soil. Journal of the Soil Mechanics and Foundations Division, 94 (SM4), 951–979.
Woods, R. D., Barnett, N. E., & Sagesser, R. (1974). Holography: A new tool for soil dynamics. Journal of the Geotechnical Engineering Division, 100(11), 1231-1247.
Yang, Y., & Hung, H. (1997). Parametric study of wave barriers for reduction of train-induced vibrations. International Journal for Numerical Methods in Engineering, 40(20), 3729−3747.
Zhang, M., & Tao, M. A. (2011). Parametric study on factors affecting ground vibrations during pile driving through finite element simulations. Geo-Risk, 931-938.
Zoccali, P., Cantisani, G., & Loprencipe, G. (2015). Ground-vibrations induced by trains: Filled trenches mitigation capacity and length influence. Construction and Building Materials, 74, 1-8.
